null

Flat Rate Shipping- On All Orders -

Bravo Company Vertical Grip KeyMod Mod 3 Black

$18.95
(No reviews yet) Write a Review
SKU:
BCM-VG-KM-MOD-3-BLK
Finish:
Black

Direct Attach to KeyMod™ Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

Finish: Black




Tools needed: T15 Torx Driver (not supplied)




  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod™ Vertical Grip
  • Push tool into the screw to extend the KeyMod™ anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod™ slots. Grip can be installed in your desired orientation, angled forward or back.
  • After the anchor is inserted, slide the BCM® Vertical Grip forward until it travels no further.
  • Push the BCM Vertical Grip against rail, engaging the accessory’s recoil lugs to the intersecting KeyMod™ opening.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

*Blue thread locker may be used on threaded fasteners


Bravo Company Vertical BCM Grip KeyMod Mod 3 Black